Although the series of temperature analysis is still small, there are μ - EXCEL series which can easily perform unsteady temperature analysis . Other themes such as structural analysis and fluid analysis are under research and development. These are developed according to customer's request.
 |
"Thermal conduction plate" For the unsteady temperature distribution analysis of the heating / cooling mechanism
- Unsteady temperature analysis
- Temperature / heat flow velocity distribution
- Designation of heating element, cooling pipe
- Consideration of contact heat transfer coefficient between materials
- Transmission boundary, radiation boundary, material temperature dependence (under development)
|
 |
"Inductive heating plate" for induction heating / quenching coil temperature analysis and circuit design
- High frequency eddy current analysis of heating coil
- Continuous unsteady temperature analysis
- Temperature, heat generation, magnetic field distribution, magnetic field lines
- Transmission boundary, radiation boundary, material temperature dependence, magnetic material nonlinearity
- Impedance calculation, resonance circuit design
|
 |
"Mold cooling plate" Unsteady temperature analysis dedicated to press dies
- For cooling circuit design with mold of press parts
- Initial temperature of press parts, position of mold side cooling pipe, number of pieces, setting of heat absorption amount
- Repeated unsteady temperature calculation of cooling process after pressing and insertion of new press parts
- Heat transfer coefficient can be set by press pressure
- Display of temperature change
|
 |
"Wiring Electrothermal Plate" for wiring heat generation of printed circuit board
- Joule thermal unsteady temperature analysis of printed wiring
- Output current density and temperature distribution at specified time
- Designation of lead wire, heating wire, electrode
- Fitting by heating factor
|
 |
"Structural analysis version" structural analysis is more familiar with Excel
- Elastic stress analysis (planar strain / plane stress / axial symmetry)
- Output of stress vector, stress contour line, strain contour line
- Young's modulus, Poisson's ratio, linear expansion coefficient, density setting
- Distribution force, displacement, heat, acceleration load setting
|
 |
"Fluid analysis version" Fluid analysis also becomes more familiar with Excel
- Incompressible viscous fluid (nonstationary finite element method)
- Flow Velocity Vector, Flow Contour Contour for Each Time, Output of Pressure Contour
- Reynolds number specification
- Specify time step, time step
|
 |
Two-dimensional magnetic field distribution analysis of "MRI version" MRI shielded room
- Special package for architectural, design and construction company
- Selection of 1.5 T, 3 T of MRI coil
- Only the setting of the outline of the room and the number of shield materials
- Meshing> Calculation> Result display to one calculation button
- Display 5 Gauss line
|
 |
"Electromagnetic wave version (under development)" 2-dimensional electromagnetic wave analysis
- Analysis of TM wave, TE wave electromagnetic wave propagation by FDTD method
|
